CE,ISO approved mineral water plant low cost 6000BPH water bottling line 5.03kw
Specification
CGF18-18-6 mineral water plant low cost water bottling line with 380V/50HZ
1.mineral water plant cost
2.water bottling line
3.CE,ISO,SGS
4. mineral water plant
Features:This water filling machine is with bottle rinsing, filling and capping monobloc for drinking water (non-carbonated) filling.PET bottles infeed by combination of infeed grippers, equipped with bottle jam protection device, the machine applies unique overturning bottle clamp, which is an innovation of our Zhangjiagang Jiayuan machinery company .
washing part
PET bottles infeed by combination of infeed grippers, equipped with bottle jam protection device, the machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck postion, avoiding bottle mouth thread comtamination caused by rubber gripper block of a traditional bottle clamp. This part is made of SUS 304 stainless steel, the bottle clamp is hygienic and durable.
The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and aso saves rinsing water.
All sliding bushes of lifting device use anti-corrosion maintenance free bearing and the rinser is driven by driving system positioned inside machine frame via gear transmission.
filling part
Rotary wheel fully made of stainless steel SUS 304
Gravity filling method
Filling valves aer reasonably structured with accurate filling.
Bottle go up and down in the function of cam through elevator to process filling with contact to bottle-mouth.
Level of cylinder is controlled with float-ball
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.
capping part
Capper should have highest precision, influence very much with stability and realiable of the filling monoboc. Our capper
features as follows:
Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.
Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of caps.
A cap inspection system is applied to control on-off of elevator.
Main technical parameter
CGF18-18-6 mineral water plant low cost water bottling line with 380V/50HZ
|
Model
|
CGF18-18-6
|
|
Production capacity(500ml)(b/h)
|
4000-6000
|
|
Filling precision
|
≤±5MMLiquid Level
|
|
Polyester bottle standard(mm)
|
≤±5MM(Liquid Level)
|
|
Height
|
(Height):150-320
|
|
Suitable cap shape
|
Plastic Screw Cap)
|
|
Water pressure of Washing bottle(MPa)
|
0.18
|
|
Water consumption for Water bottle (kg/h)
|
1600
|
|
Spraying position
|
5
|
|
Dripping bottle position
|
3
|
|
Gas source pressure(Mpa)
|
normal pressure
|
|
Gas consumption(m3/mm)
|
0.3
|
|
Total power
|
5.03
|
|
Total weight
|
3500
|
|
Dimension(L*W*H)
|
2450*1800×2200
|
